Materials and Surfaces

Selected bibliography

Completeness is not guaranteed.

Bacterial Adhesion of TESPSA and Citric Acid on Different Titanium Surfaces Substrate Roughness: An In Vitro Study with a Multispecies Oral Biofilm Model.

By: Vilarrasa, J.; Àlvarez, G.; Soler-Ollé, A.; Gil, J.; Nart, J.; Blanc, V. ,

Published at Materials -

Year 2024.

Hybrid surface implants: Influence of residual stress on mechanical behavior, evaluated by finite element analysis and validation by fatigue tests

By: Marta Sanjuán, Aritza Brizuela-Velasco, Javier Gil, Miguel Cerrolaza, Enrique Montalvillo, Saray Fernández-Hernández, Daniel Robles.,

Published at Materials -

Year 2024.

Comparison of the Antibacterial Effect of Silver Nanoparticles and a Multifunctional Antimicrobial Peptide on Titanium Surface.

By: Moreno, D.; Buxadera-Palomero, J.; Ginebra, M.-P.; Manero, J.-M.; Martin-Gómez, H.; Mas-Moruno, C.; Rodríguez, D.,

Published at International Journal of Molecular Sciences -

Year 2023.

Citric Acid in the Passivation of Titanium Dental Implants: Corrosion Resistance and Bactericide Behavior

By: Verdeguer, P.; Gil, J.; Punset, M.; Manero, J.M.; Nart, J.; Vilarrasa, J.; Ruperez, E.,

Published at Materials -

Year 2022.

Bacteriostatic Poly Ethylene Glycol Plasma Coatings for Orthodontic Titanium Mini-Implants

By: Rodriguez-Fernandez, J.C.; Pastor, F.; Barrera Mora, J.M.; Brizuela, A.; Puigdollers, A.; Espinar, E.; Gil, F.J.,

Published at Materials -

Year 2022.

Effect of the Nature of the Particles Released from Bone Level Dental Implants: Physicochemical and Biological Characterization

By: Vara, J.C.; Delgado, J.; Estrada-Martínez, A.; Pérez-Pevida, E.; Brizuela, A.; Bosch, B.; Pérez, R.; Gil, J,

Published at Coatings -

Year 2022.

Bacteriostatic Poly Ethylene Glycol Plasma Coatings for Orthodontic Titanium Mini-Implants

By: Rodriguez-Fernandez, J.C.; Pastor, F.; Barrera Mora, J.M.; Brizuela, A.; Puigdollers, A.; Espinar, E.; Gil, F.J.,

Published at Materials -

Year 2022.

Mechanical Properties and Corrosion Behavior of Ti6Al4V Particles Obtained by Implantoplasty: An In Vitro Study. Part II.

By: Toledano-Serrabona J, Sánchez-Garcés MÁ, Gay-Escoda C, et al.,

Published at Materials -

Year 2022.

Influence of Bone-Level Dental Implants Placement and of Cortical Thickness on Osseointegration: In Silico and In Vivo Analyses

By: Gil, J.; Sandino, C.; Cerrolaza, M.; Pérez, R.; Herrero-Climent, M.; Rios-Carrasco, B.; Rios-Santos, J.V.; Brizuela, A.,

Published at Journal of Clinical Medicine -

Year 2022.

Relevant Aspects of Piranha Passivation in Ti6Al4V Alloy Dental Meshes

By: Cruz, N.; Gil, J.; Punset, M.; Manero, J.M.; Tondela, J.P.; Verdeguer, P.; Aparicio, C.; Rúperez, E.,

Published at Coatings -

Year 2022.

Corrosion Behavior of Titanium Dental Implants with Implantoplasty

By: Lozano, P.; Peña, M.; Herrero-Climent, M.; Rios-Santos, J.V.; Rios-Carrasco, B.; Brizuela, A.; Gil, J.,

Published at Materials -

Year 2022.

The effect of using Al2O3 and TiO2 in sandblasting of titanium dental implants

By: Gil, F.J., Pérez, R.A., Olmos, J. et al.,

Published at Journal of materials research -

Year 2022.

The Characterization of Titanium Particles Released from Bone-Level Titanium Dental Implants: Effect of the Size of Particles on the Ion Release and Cytotoxicity Behaviour

By: Callejas JA, Brizuela A, Ríos-Carrasco B, Gil J.,

Published at Materials -

Year 2022.

Optimization of Titanium Dental Mesh Surfaces for Biological Sealing and Prevention of Bacterial Colonization

By: Cruz N, Tondela JP, Martins MI, Velasco-Ortega E, Gil J.,

Published at Materials -

Year 2022.

Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications.

By: Fernández-Arias M, Vilas AM, Boutinguiza M, Rodríguez D, Arias-González F, Pou-Álvarez P, Riveiro A, Gil J, Pou J.,

Published at Nanomaterials -

Year 2022.

Benefits of Residual Aluminum Oxide for Sand Blasting Titanium Dental Implants: Osseointegration and Bactericidal Effects

By: Gil, J.; Pérez, R.; Herrero-Climent, M.; Rizo-Gorrita, M.; Torres-Lagares, D.; Gutierrez, J.L.,

Published at Materials -

Year 2022.

Effect of the Size of Titanium Particles Released from Dental Implants on Immunological Response.

By: Callejas JA, Gil J, Brizuela A, Pérez RA, Bosch BM.,

Published at International Journal of Molecular Sciences -

Year 2022.

A Radiographic and Clinical Comparison of Immediate vs. Early Loading (4 Weeks) of Implants with a New Thermo-Chemically Treated Surface: A Randomized Clinical Trial.

By: Albertini, M.; Herrero-Climent, F.; Díaz-Castro, C.M.; Nart, J.; Fernández-Palacín, A.; Ríos-Santos, J.V.; Herrero-Climent, M,

Published at International Journal of Environmental Research And Public health -

Year 2021.

Citric Acid Passivation of Titanium Dental Implants for Minimizing Bacterial Colonization Impact.

By: Punset, M.; Vilarrasa, J.; Nart, J.; Manero, J.M.; Bosch, B.; Padrós, R.; Perez, R.A.; Gil, J.,

Published at Coatings -

Year 2021.

Logistic Regression Analysis of the Factors Involved in the Failure of Osseointegration and Survival of Dental Implants with an Internal Connection and Machined Collar: A 6-Year Retrospective Cohort Study.

By: Brizuela-Velasco A, Álvarez-Arenal Á, Pérez-Pevida E, Bellanco-De La Pinta I, De Llanos-Lanchares H, González-González I, Larrazábal-Morón C.,

Published at BioMed Research International -

Year 2021.

Effect of the Acid-Etching on Grit-Blasted Dental Implants to Improve Osseointegration: Histomorphometric Analysis of the Bone-Implant Contact in the Rabbit Tibia Model.

By: Ríos-Carrasco, B.; Lemos, B.F.; Herrero-Climent, M.; Gil Mur, F.J.; Ríos-Santos, J.V.,

Published at Coatings -

Year 2021.

Zirconia vs. Titanium Dental Implants: Primary Stability In-Vitro Analysis

By: Arlucea, N.; Brizuela-Velasco, A.; Dieguez-Pereira, M.; Punset, M.; Molmeneu, M.; Sánchez Lasheras, F.; deLlanos-Lanchares, H.; Álvarez-Arenal, Á.,

Published at Materials -

Year 2021.

Fatigue of Narrow Dental Implants: Influence of the Hardening Method

By: Pérez RA, Gargallo J, Altuna P, Herrero-Climent M, Gil FJ.,

Published at Clinical Oral Implants Research -

Year 2020.

Review of the Mechanical Behavior of Diferent implant-abutment connections

By: Vinhas, A.S.; Aroso, C.; Salazar, F.; López-Jarana, P.; Ríos-Santos, J.V.; Herrero-Climent, M.,

Published at International Journal of Environmental Research And Public health -

Year 2020.

Fracture and Fatigue of Titanium Narrow Dental Implants: New Trends in Order to Improve the Mechanical Response

By: Velasco-Ortega E, Flichy-Fernández A, Punset M, Jiménez-Guerra A, Manero JM, Gil J.,

Published at Materials -

Year 2019.

Crestal module design optimization of dental implants: finite element analysis and in vivo studies

By: Dávila E, Ortiz-Hernandez M, Perez R, Climent M, Cerrolaza M, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2019.

Enhanced osteoconductivity on electrically charged titanium implants treated by physicochemical surface modifications methods

By: Marc Fernández-Yagüe, Roman Perez Antoñanzas, Joan Josep Roa, Manus Biggs, F. Javier Gil, Marta Pegueroles.,

Published at Nanomedicine: Nanotechnology, Biology, and Medicine -

Year 2019.

Influence of a Novel Surface of Bioactive Implants on Osseointegration: A Comparative and Histomorfometric Correlation and Implant Stability Study in Minipigs

By: Romero-Ruiz MM, Gil-Mur FJ, Ríos-Santos JV, Lázaro-Calvo P, Ríos-Carrasco B, Herrero-Climent M.,

Published at European Journal of dentistry -

Year 2018.

Effectiveness of a new dental implant bioactive surface: histological and histomorphometric comparative study in minipigs

By: Herrero-Climent M, Romero Ruiz MM, Calvo PL, Santos JVR, Perez RA, Gil Mur FJ.,

Published at Clinical Oral Investigations -

Year 2017.

Relevant aspects in the surface properties in titanium dental implants for the cellular viability.

By: Velasco-Ortega E, Alfonso-Rodríguez CA, Monsalve-Guil L, España-López A, Jiménez-Guerra A, Garzón I, Alaminos M, Gil FJ.,

Published at Materials Science and Engineering C -

Year 2016.

A Biomimetic Surface for Immediate and Early Loading of Dental Implants Surface Characterization and Results from Histological Studies.

By: Climent M, Costa C, Gil FJ, Albertini M, Nart J.,

Published at JSM Dental Surgery -

Year 2016.

Anhydride-functional silane immobilized onto titanium surfaces induces osteoblast cell differentiation andreduces bacterial Adhesión and biofilm formation.

By: Maria Godoy-Gallardo, Jordi Guillem-Marti, Pablo Sevilla, José M. Manero, Francisco J. Gil, Daniel Rodriguez.,

Published at Materials Science and Engineering C -

Year 2016.

Roughness and wettability effect on histological and mechanical response of self-drilling orthodontic mini-implants.

By: Espinar-Escalona E, Bravo-Gonzalez LA, Pegueroles M, Gil FJ.,

Published at Clinical Oral Investigations -

Year 2016.

Influence of a Novel Surface of Bioactive Implants on Osseointegration: A Comparative and Histomorfometric Correlation and Implant Stability Study in Minipigs.

By: Romero-Ruiz MM, Gil-Mur FJ, Ríos-Santos JV, Lázaro-Calvo P, Ríos-Carrasco B, Herrero-Climent M.,

Published at International Journal of Molecular Sciences -

Year 2016.

Biofunctionalization strategies on tantalum-based materials for osseointegrative applications.

By: Mas-Moruno C, Garrido B, Rodriguez D, Ruperez E, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2015.

Surface immobilization and bioactivity of TGF-β1 inhibitor peptides for bone implant applications.

By: Sevilla P, Vining KV, Dotor J, Rodriguez D, Gil FJ, Aparicio C,

Published at Journal of Biomedical Materials Research -

Year 2015.

Mechanical and physicochemical characterization along with biological interactions of a new Ti25Nb21Hf alloy for bone tissue engineering

By: Herranz-Diez C, Gil FJ, Guillem-Marti J, Manero JM.,

Published at Journal of Biomaterials Applications -

Year 2015.

Advances in surfaces and osseointegration in implantology. Biomimetic surfaces.

By: Albertini M, Fernandez-Yague M, Lázaro P, Herrero-Climent M, Rios-Santos JV, Bullon P, Gil FJ.,

Published at Medicina Oral Patología Oral Cirugíua Bucal -

Year 2015.

Effect of irrigation and stainless steel drills on dental implant bed heat generation.

By: Bullon B, Bueno E, Herrero M, Fernandez-Palacin A, Rios J, Bullon P, Gil, FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2015.

Antibacterial coatings on titanium surfaces: a comparison study between in vitro single-species and multispecies biofilm.

By: Godoy-Gallardo M, Wang Z, Shen Y, Manero JM, Gil FJ, Rodriguez D, Haapasalo M.,

Published at Applied Materials and Interfaces -

Year 2015.

Silver deposition on titanium surface by electrochemical anodizing process reduces bacterial Adhesión of Streptococcus sanguinis and Lactobacillus salivarius.

By: Godoy-Gallardo M, Rodríguez-Hernández AG, Delgado LM, Manero JM, Javier Gil F, Rodríguez D.,

Published at Clinical Oral Implants Research -

Year 2014.

Fatigue life of bioactive titanium dental implants treated by means of grit-blasting and thermo-chemical treatment.

By: Gil FJ, Espinar E, Llamas JM, Sevilla P.,

Published at Clinical Implant Dentistry and Related Research -

Year 2014.

Obtention and characterization of new superelastic polymer for biomedical applications.Comparison with NiTi and NiTiCu alloys.

By: J.C. Varela, M. Velo, E. Espinar, J.M. Llamas, F.J. Gil.,

Published at Materials Letters -

Year 2013.

Alúmina shot-blasted particles on commercially pure titanium surfaces prevent bacterial attachment

By: A. Rodríguez-Hernández, E. Espinar, J.M. Llamas, J.M. Barrera, F.J. Gil.,

Published at Materials Letters -

Year 2013.

S. sanguinis Adhesión on rough titanium surfaces: effect of culture media

By: Rodríguez-Hernández AG, Muñoz-Tabares JA, Godoy-Gallardo M, Juárez A, Gil FJ,

Published at Materials Science and Engineering C -

Year 2013.

In-vitro response of pre-osteoblastic MG63 cells on Ni-free Ti shape memory substrates

By: Arciniegas M, Peña J, Gil FJ, Manero JM,

Published at Journal of Biomedical Materials Research -

Year 2013.

Fibroblast Adhesión and activation onto micro-machined titanium surfaces.

By: Guillem-Marti J, Delgado L, Godoy-Gallardo M, Pegueroles M, Herrero M, Gil FJ.,

Published at Clinical Oral Implants Research -

Year 2013.

Influence of Soft Drinks with Low pH on Different Ni-Ti Orthodontic Archwire Surface Patterns

By: Abalos C, Paúl A, Mendoza A, Solano E, Palazon C, Gil FJ.,

Published at Journal of materials engineering and performance -

Year 2013.

Influence of acid-etching after grit-blasted on osseointegration of titanium dental implants. In vitro and in vivo studies.

By: Herrero-Climent M, Lázaro P, Vicente Rios J, Lluch S, Marqués M, Guillem-Martí J, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2013.

Effect of the oral bacteria on the mechanical behavior of titanium dental implants.

By: Gil FJ, Rodriguez A, Espinar-Escalona E, Llamas J, Padullés E, Juárez A.,

Published at The International Journal of Oral & Maxillofacial Implants -

Year 2012.

Comparative study on AISI 440 and AISI 420B stainless steel for dental drill performance

By: M. Albertini, M. Herrero-Climent, P. Lázaro, J.V. Rios, F.J. Gil.,

Published at Materials Letters -

Year 2012.

Corrosión and Corrosión-fatigue behavior of cp-Ti and Ti-6Al-4V laser-marked biomaterials.

By: Gil FJ, Delgado L, Espinar E, Llamas JM.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2012.

Variation of the superelastic properties and nickel release from original and reused NiTi orthodontic archwires.

By: F.J. Gil, E. Espinar, J.M. Llamas, J.M. Manero, M.P. Ginebra.,

Published at Journal of the Mechanical Behavior of Biomedical Materials -

Year 2012.

Adsorption of fibronectin, fibrinogen, and albumin on TiO2: time-resolved kinetics, structural changes, and competition study.

By: Pegueroles M, Tonda-Turo Ch, Planell JA, Gil FJ, Aparicio C.,

Published at Biointerphases -

Year 2012.

Effect of blasting treatment and Fn coating on MG63 Adhesión and differentiation on titanium: a gene expression study using real-time RT-PCR.

By: Pegueroles M, Aguirre A, Engel E, Pavon G, Gil FJ, Planell JA, Migonney V, Aparicio C.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2011.

Streptococcus sanguinis Adhesión on titanium rough surfaces: effect of shot-blasting particles.

By: Ana G. Rodríguez-Hernández, José A. Muñoz-Tabares, Maria Godoy-Gallardo, Antonio Juárez, Francisco-Javier Gil.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2011.

Variation of roughness and Adhesión strength of deposited apatite layers on titanium dental implants

By: C. Aparicio, D. Rodriguez, F.J. Gil,,

Published at Materials Science and Engineering C -

Year 2011.

In vivo evaluation of micro-rough and bioactive titanium dental implants using histometry and pull-out tests.

By: Aparicio C, Padrós A, Gil FJ,

Published at Journal of the Mechanical Behavior of Biomedical Materials -

Year 2011.

Biofunctionalization of titanium surfaces for osseintegration process improvement.

By: Sevilla P, Godoy-Gallardo M, Salvagni E, Rodríguez D, Gil FL.,

Published at Journal of Physics -

Year 2010.

Spatial organization of osteoblast fibronectin matrix on titanium surfaces: Effects of roughness, chemical heterogeneity and surface energy

By: M. Pegueroles, C. Aparicio, M. Bosio, E. Engel, F.J. Gil, J.A. Planell, G. Altankov.,

Published at Acta Biomaterialia -

Year 2010.

Evaluating mechanical properties and degradation of YTZP dental implants

By: Pablo Sevilla, Clara Sandino, Milena Arciniegas, Jordi Martínez-Gomis, Maria Peraire, Francisco Javier Gil,,

Published at Materials Science and Engineering C -

Year 2010.

Influence of cold work in the elastic modulus of Ti-16.2Hf-24.8Nb-1Zr Alloy characterized by instrumented nanoindentation.

By: González Colominas M, Peña J, Manero JM, Gil FJ.,

Published at Key Engineering Materials -

Year 2010.

Optimization of the Ti-16.2Hf-24.8Nb-1Zr Alloy by Cold Working

By: González Colominas M, Peña J, Manero JM, Arciniegas M, Gil, FJ.,

Published at Journal of materials engineering and performance -

Year 2009.

Design and Characterization of New Ti-Nb-Hf Alloys

By: González Colominas M, Peña J, Manero JM, Arciniegas, M, Gil, FJ.,

Published at Journal of materials engineering and performance -

Year 2009.

Mechanical properties of organically modified silicates for bone regeneration.

By: Manzano M, Salinas AJ, Gil FJ, Vallet-Regí M.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2009.

Study of hardness and wear behaviour of NiTi shape memory alloys

By: M. Arciniegas, J. Casals, J.M. Manero, J. Peña, F.J. Gil.,

Published at Journal of Alloys and Compounds -

Year 2008.

The influence of blasting and sterilization on static and time-related wettability and surface-energy properties of titanium surfaces

By: M. Pegueroles, F.J. Gil, J.A. Planell, C. Aparicio.,

Published at Surface and Coatings Technology -

Year 2008.

Oxidized NiTi surfaces enhance differentiation of osteoblast-like cells.

By: Michiardi A, Engel E, Aparicio C, Planell JA, Gil FJ.,

Published at Journal of Biomedical Materials Research -

Year 2008.

Laser welding of NiTi orthodontic archwires for selective force application.

By: Sevilla P, Martorell F, Libenson C, Planell JA, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2008.

Quantum parameters for guiding the design of Ti alloys with shape memory and/or low elastic modulus

By: Arciniegas M, Peña J, Manero, JM, Paniagua J, Gil F.J.,

Published at Philosophical Magazine -

Year 2008.

Study of New Multifunctional Shape Memory and Low Elastic Modulus Ni-Free Ti Alloys

By: Arciniegas M, Manero JM, Peña J, Gil, FJ, Planell, Josep A.,

Published at Metallurgical and Materials Transactions A -

Year 2008.

Dental casting alloys behaviour during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior.

By: Nogués L, Martinez-Gomis J, Molina C, Peraire M, Salsench J, Sevilla P, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2008.

Microstructure and macroscopic properties of bioactive CaO-SiO2-PDMS hybrids.

By: Salinas, Antonio Merino J, Babonneau, Florence, Gil, F.J. Vallet-Regí, M.,

Published at Journal of Biomedical Materials Research -

Year 2007.

The influence of surface energy on competitive protein adsorption on oxidized NiTi surfaces.

By: Michiardi A, Aparicio C, Ratner BD, Planell JA, Gil J.,

Published at Biomaterials -

Year 2007.

Electrochemical behaviour of oxidized NiTi shape memory alloys for biomedical applications

By: A. Michiardi, C. Aparicio, J.A. Planell, F.J. Gil,,

Published at Surface and Coatings Technology -

Year 2007.

Oxidized nickel-titanium foams for bone reconstructions: chemical and mechanical characterization.

By: Barrabés M, Michiardi A, Aparicio C, Sevilla P, Planell JA, Gil FJ.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2007.

Low elastic modulus metals for joint prosthesis: Tantalum and nickel–titanium foams.

By: M. Arciniegas, C. Aparicio, J.M. Manero, F.J. Gil.,

Published at Journal of the European Ceramic Society -

Year 2007.

Acceleration of apatite nucleation on microrough bioactive titanium for bone-replacing implants.

By: Aparicio C, Manero JM, Conde F, Pegueroles M, Planell JA, Vallet-Regí M, Gil FJ.,

Published at Journal of Biomedical Materials Research -

Year 2007.

Effects of recasting on the chemical composition, microstructure, microhardness, and ion release of 3 dental casting alloys and titanium.

By: Peraire M, Martinez-Gomis J, Anglada JM, Bizar J, Salsench J, Gil FJ.,

Published at The international Journal of Prosthodontics -

Year 2007.

The effect of shot blasting and heat treatment on the fatigue behavior of titanium for dental implant applications.

By: Javier Gil F, Planell JA, Padrós A, Aparicio C.,

Published at Dental Materials -

Year 2007.

Comparison of the mechanical properties between tantalum and nickel–titanium foams implant materials for bone ingrowth applications

By: P. Sevilla, C. Aparicio, J.A. Planell, F.J. Gil.,

Published at Journal of Alloys and Compounds -

Year 2007.

Bioactive star gels

By: Manzano, Miguel, Arcos, Daniel, Delgado, Montserrat, Ruiz-Hernandez, Eduardo, Gil, F.J., Vallet-Regí, M.,

Published at Journal of materials Chemistry -

Year 2006.

New oxidation treatment of NiTi shape memory alloys to obtain Ni-free surfaces and to improve biocompatibility.

By: Michiardi A, Aparicio C, Planell JA, Gil FJ.,

Published at Journal of Biomedical Materials Research -

Year 2006.

Bioactivity and mechanical properties of SiO2–CaO–P2O5 glass-ceramics

By: Padilla, Sussette, Doadrio, J., Gil, F.J.,

Published at Journal of materials Chemistry -

Year 2005.

Effect of the M(s) transformation temperature on the wear behaviour of NiTi shape memory alloys for articular prosthesis.

By: Peña J, Solano E, Mendoza A, Casals J, Planell JA, Gil FJ.,

Published at Biomedical Materials and Engineering -

Year 2005.

Roughness and Bonding Strength of Bioactive Apatite Layer on Dental Implants

By: Nogueras-Bayona J, Gil FJ, Salsench J, Martinez-Gomis J.,

Published at Implant Dentistry -

Year 2004.

Continuous mandibular distraction Osteogénesis using superelastic shape memory alloy (SMA)

By: Idelsohn S, Peña J, Lacroix D, Planell JA, Gil FJ, Arcas A.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2004.

The effect of cooling rate on the cyclic deformation of β-annealed Ti–6Al–4V

By: F.J Gil, J.M Manero, M.P Ginebra, J.A Planell,,

Published at Materials Science and Engineering A -

Year 2003.

Cyclic deformation fatigue behaviour of Ti-6Al-4V thermochemically nitrided for arthicular prostheses.

By: Gil FJ, Manero JM, Rodriguez D, Planell JA.,

Published at Journal of Applied Biomaterials and Biomechanics -

Year 2003.

Osseointegration of Grit-Blasted and Bioactive Titanium Implants: Histomorphometry in Minipigs

By: Aparicio, Conrado, Gil, F.J., Thams, U., Muñoz, Fernando, Padrós, A., Planell, Josep A.,

Published at Key Engineering Materials -

Year 2003.

Corrosión behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications

By: Aparicio C, Gil FJ, Fonseca C, Barbosa M, Planell JA.,

Published at Biomaterials -

Year 2003.

Localized Corrosión of 316L stainless steel with SiO2-CaO films obtained by means of sol–gel treatment.

By: Vallet-Regí M, Izquierdo-Barba I, Gil FJ.,

Published at Journal of Biomedical Materials Research -

Year 2003.

Effect of oxygen content on grain growth kinetics of titanium

By: Gil, F.J., Aparicio, C., Planell, J.A.,

Published at Journal of Materials Synthesis and Processing -

Year 2002.

Human ostoeblast proliferation and differentiation on grit-blasted and bioactive titanium for dental applications.

By: Aparicio C, Gil FJ, Planell JA, Engel E.,

Published at Journal of Materials Science: Materials in Medicine -

Year 2002.

Growth of bioactive surfaces on titanium and its alloys for orthopaedic and dental implants

By: F.J Gil, A Padrós, J.M Manero, C Aparicio, M Nilsson, J.A Planell,,

Published at Materials Science and Engineering C -

Year 2002.

Fracture and fatigue behavior of shot-blasted titanium dental implants.

By: Gil, F.J.,Planell, Josep A., Padrós, A.,

Published at Implant Dentistry -

Year 2002.

Growth of Bioactive surfaces on dental implants.

By: Manero JM, Salsench J, Nogueras J, Aparicio C, Padrós A, Balcells M, Gil FJ, Planell JA.,

Published at Implant Dentistry -

Year 2002.

Optimization of the Ti-0.2Pd alloy properties through heat treatments.

By: J.A Picas, A Forn, F.J Gil,,

Published at Journal of Light Metals -

Year 2002.

Formation of α-Widmanstätten structure: effects of grain size and cooling rate on the Widmanstätten morphologies and on the mechanical properties in Ti6Al4V alloy

By: F.J. Gil, M.P. Ginebra, J.M. Manero, J.A. Planell,,

Published at Journal of Alloys and Compounds -

Year 2001.

Grain growth kinetic of the near alpha titanium alloys

By: Gil, F.J., Planell, J.A.,

Published at Journal of Materials Science Letters -

Year 2000.

Materials and Surfaces

Products

Languages