Cemented Solutions

Cemented prosthesis

The abutments available for your cemented works on VEGA and VEGA+.

Cemented Solutions

1

4º straight abutments

The KLOCKNER VEGA and VEGA+ (NV and RV) prosthetic implant system has straight abutments for cementing. These grade-V titanium abutments are designed with a 4º taper and have an anti-rotational system for repositioning the crown in single-tooth restorations. The available transmucosal heights are 1, 2 and 3 mm. There are two prosthetic heights for cementing: 4.5 and 7 mm.

2

4º anatomical abutments

The KLOCKNER VEGA and VEGA+ (MV) implants have specific anatomical abutments in order to achieve the best aesthetic results. These grade-V titanium abutments are designed with a 4° taper. The available transmucosal heights are 2, 3 and 4 mm with a prosthetic height for cementing of 4.5 mm.

3

Angled abutments

In cases where it is necessary to restore non-parallel implants, the VEGA and VEGA+ (NV and RV) prosthetic implant system has cementing abutments at 15º and 25º angles. These abutments are available in different transmucosal heights of 2 and 3 mm.

4

Zero abutment

One of the new tissue preparation techniques is the BOPT (Biologically Oriented Preparation Technique), in which the tissues are guided periodontally through prosthetic restoration. The KLOCKNER VEGA and VEGA+ (MV and NV) prosthetic implant system has a straight abutment with a 2º axial-wall taper, for those clinicians who want to put this technique into practice.

5

Screw

All abutments for cement-retained solutions are fixed with original KLOCKNER screws. It is advisable not to exert tightening forces on the abutments and/or screws during the process of making the prosthesis. All the abutments mentioned include the screw.

Related products